UPS able
4
Enlarge Image
RUST-OLEUM CORPORATION

BIN Shellac-Base Interior and Spot Exterior Primer, Flat White, 1 gal Bucket/Pail, 2/Carton

  • Product Type : 
  • Item # :  RST320991CT

Quick Overview

  • The original shellac primer/sealer—trusted for decades.
  • High-hiding formula covers even the most stubborn and persistent stains.
  • Seals porous surfaces with excellent enamel holdout.
  • Permanently blocks most every kind of odor.
  • Excellent adhesion to all, even glossy, surfaces—no scuff sanding required.
  • Dried film is non-toxic and hypo-allergenic.
  • Can be applied in freezing temperatures.

$191.90/Carton

 
Qty: Add to Cart
Description

Looking for a “silver bullet” primer that covers everything? Choose the primer that contractors have kept in their vans for decades: Zinsser® BIN® Shellac-Base Primer. As the original shellac primer/sealer, nearly nothing is better at permanently covering bleeding wood knots, sap streaks and graffiti as well as water, grease, rust, smoke and many other types of stains. This pioneering primer/sealer permanently blocks most every kind of odor, too. When it comes to preparing indoor surfaces for topcoats while sealing nearly any porous surface, especially where excellent enamel holdout is required, few primers match BIN® Shellac-Base Primer. It can even be applied when temperatures dip below freezing. Though it's designed specifically for indoor application to ceilings, walls, doors, trim, cabinets, furniture and more, this versatile product is also capable of spot priming certain exterior surfaces (see product packaging for more details).

 

General Information

Global Product Type
Building/Construction Paints & Primers
Paint Sub-Category
Primer, Shellac-Based
Color Family
White
Intended Application Environment
Interior/Exterior
Finish/Sheen
Flat
Recommended Level of Ventilation
Moderate
Volume Capacity
1 gal
Packaging Type
Bucket/Pail
Binder/Vehicle Ingredient(s)
Shellac
Diluent/Solvent Ingredient(s)
Denatured Alcohol,Water
Color(s)
White
Application Method
Brush,Roller
Application Temperature Range
0º and 90ºF
Applicable Surface Material
Cement,Concrete,Drywall,Glass/Ceramics,Masonry,Metal,Plaster,Plastic,Wood
Maximum Coverage Area
500 sq ft
Cure/Dry-Time Range
20 min (Touch),45 min (Handle, Re-Coat),1-3 Days (Full Cure)
Age Recommendation
Ages 16 and Up
Product Biodegradability Indicator
N
Product Biodegradability in Days
0
Product Compostability Indicator
N
Pre-Consumer Recycled Content Percent
0%
Post-Consumer Recycled Content Percent
0%
Total Recycled Content Percent
0%
Disclaimer Statement
B-I-N Shellac-Base Primer is not recommended for whole surface exterior application or for application to floors, decks, or any surface subject to immersion or prolonged contact with water. Apply only when air, material, and surface temperatures are between 0 and 90ºF (-18 and 32ºC) and the relative humidity is below 70%. Do not apply B-I-N if surface temperature is within 15°F of the dew point. Substrate moisture should not exceed 12%. DO NOT THIN.
Footnote 1
Recommended Dry Film Thickness (DFT) Per Coat: 0.75 to 0.9 mils
Footnote 2
Recommended Wet Film Thickness to Achieve DFT: 2.5 to 3 mils
Country of Origin
US
Carton Weight
22.0
Carton Pack Quantity
2/EA
Pack Quantity
0
UPC
047719009016
UNSPSC
31211509

Shipping Weight & Item Dimensions

Weight
21.594 lbs
Length
14.0 in
Height
8.0 in
Width
7.0 in
 
 

© 2024-2025 Regal Office Supplies, All Rights Reserved